Rent Expiry Notice Draft

MX020 (IX Series) Weighing Terminal software Xk3101

Indicador electrónico HL_2065

Calibration


Calibrating and data setting There are 2 methods for you to enter setting / calibrating mode.
a. Don’t need to open the indicator front-cover. After power-on, keep pressing [MODE] and [ZERO] while the indicator is self-checking “0 ~ 9”, loose the 2 keys at the same time if the indicator displays “Und0”. At this time the indicator displays “CAL X” (“X” refers to 0 or 1 or 2) after “SET UP” is displayed for about 2 seconds. Now the indicator enters setting / calibrating state. b. Need to open the indicator front-cover.
For entering setup/calibration, open its front cover, find out the short circuiter W1 and join 2 and 3 pin short. At this time the indicator automatically enter setup/calibration mode and displays “CAL 0” after “SET UP” is displayed for about 2 seconds. Now the indicator enters setting / calibrating state.   Display
  ①  6-digit LED ②  “ZERO” indicating light

③  “STAB” indicating light              ④  “AC” indicating light ⑤  “NET” indicating light ⑥  “lb” indicating light 4

⑦“kg” indicating light

[MODE]/[→] key
[TARE]/[ENTER] key

[ZERO]/[↑]

key [PRINT] / [ON] / [OFF] key